? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. chip inductors C 0603cs series (1608) document 195-1 document 195-1 revised 10/14/09 ultra-small size, exceptional q and high srfs make these inductors ideal for high frequency applications where size is at a premium. they also have excellent dcr and current carrying characteristics. typical l vs frequency typical q vs frequency 10 100 frequency (mhz) 1000 10000 q factor 100 80 90 60 70 40 50 20 10 30 0 120 nh 33 nh 3.9 nh 68 nh 12 nh 270 nh 10 100 frequency (mhz) inductance (nh) 1000 10000 400 350 0 50 100 150 200 250 300 120 nh 68 nh 33 nh 3.9 nh 12 nh 270 nh abcd max max max ref e f g h i j 0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 inches 1,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0,64 mm a b overall c d terminal wraparound: approx 0.007/0,18 both ends j f f g h e terminal recommended land pattern i i pick and place material -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 percent of rated rms i 25c irms derating core material ceramic terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. weight 3.2 ? 3.7 mg ambient temperature ?40c to +125c with i rms current, +125c to +140c with derated current storage temperature component: ?40c to +140c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles temperature coefficient of inductance (tcl) +25 to +125 ppm/c moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) one per billion hours / one billion hours, calculated per telcordia sr-332 packaging 2000 per 7 reel paper t ape: 8 mm wide, 1.0 mm thick, 4 mm pocket spacing pcb washing only pure water or alcohol recommended
? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. 0603cs series (1608) document 195-2 revised 10/14/09 document 195-2 srf dcr inductance 2 percent q 900 mhz 1.7 ghz min 5 max 6 i rms 7 color part number 1 (nh) tolerance 3 min 4 l typ q typ l typ q typ (ghz) (ohms) (ma) dot 0603cs-1n6x_l_ 1.6 @ 250 mhz 5 24 1.67 49 1.65 63 12.5 0.030 700 red 0603cs-1n8x_l_ 1.8 @ 250 mhz 5 16 1.83 35 1.86 50 12.5 0.045 700 black 0603cs-2n2x_l_ 2.2 @ 250 mhz 5 13 2.22 31 2.24 44 12.5 0.250 100 yellow 0603cs-3n3x_l_ 3.3 @ 250 mhz 5,2 35 3.31 75 3.38 88 5.90 0.045 700 blue 0603cs-3n6x_l_ 3.6 @ 250 mhz 5,2 22 3.72 53 3.71 65 5.90 0.063 700 red 0603cs-3n9x_l_ 3.9 @ 250 mhz 5,2 22 3.95 49 3.96 67 6.90 0.080 700 brown 0603cs-4n3x_l_ 4.3 @ 250 mhz 5,2 22 4.32 50 4.33 70 5.90 0.063 700 orange 0603cs-4n7x_l_ 4.7 @ 250 mhz 5,2 20 4.72 47 4.75 57 5.80 0.116 700 violet 0603cs-5n1x_l_ 5.1 @ 250 mhz 5,2 20 4.93 47 4.95 56 5.70 0.140 700 green 0603cs-5n6x_l_ 5.6 @ 250 mhz 5,2 26 5.77 63 6.05 80 4.76 0.075 700 black 0603cs-6n8x_l_ 6.8 @ 250 mhz 5,2 27 6.75 60 7.10 81 5.80 0.110 700 red 0603cs-7n5x_l_ 7.5 @ 250 mhz 5,2 28 7.70 60 7.82 65 4.80 0.106 700 brown 0603cs-8n2x_l_ 8.2 @ 250 mhz 5,2 30 8.25 82 8.37 87 4.20 0.115 700 orange 0603cs-8n7x_l_ 8.7 @ 250 mhz 5,2 28 8.86 62 9.32 58 4.60 0.109 700 yellow 0603cs-9n5x_l_ 9.5 @ 250 mhz 5,2 28 9.7 59 9.92 61 5.40 0.135 700 blue 0603cs-10nx_l_ 10 @ 250 mhz 5,2 31 10.0 66 10.6 83 4.80 0.130 700 orange 0603cs-11nx_l_ 11 @ 250 mhz 5,2 30 11.0 53 11.5 56 4.00 0.130 700 gray 0603cs-12nx_l_ 12 @ 250 mhz 5,2 35 12.3 72 13.5 83 4.00 0.130 700 yellow 0603cs-15nx_l_ 15 @ 250 mhz 5,2 35 15.4 64 16.8 89 4.00 0.170 700 green 0603cs-16nx_l_ 16 @ 250 mhz 5,2 34 16.2 55 17.3 52 3.30 0.170 700 white 0603cs-18nx_l_ 18 @ 250 mhz 5,2 35 18.7 70 21.4 69 3.10 0.170 700 blue 0603cs-22nx_l_ 22 @ 250 mhz 5,2 38 22.8 73 26.1 71 3.00 0.190 700 violet 0603cs-23nx_l_ 23 @ 250 mhz 5,2 38 24.1 71 28.0 67 2.85 0.190 700 orange 0603cs-24nx_l_ 24 @ 250 mhz 5,2 36 24.5 45 28.7 39 2.65 0.190 700 black 0603cs-27nx_l_ 27 @ 250 mhz 5,2 40 29.2 74 34.6 65 2.80 0.220 600 gray 0603cs-30nx_l_ 30 @ 250 mhz 5,2 37 31.4 47 39.9 28 2.25 0.220 600 brown 0603cs-33nx_l_ 33 @ 250 mhz 5,2 40 36.0 67 49.5 42 2.30 0.220 600 white 0603cs-36nx_l_ 36 @ 250 mhz 5,2 37 39.4 47 52.7 24 2.08 0.250 600 red 0603cs-39nx_l_ 39 @ 250 mhz 5,2 40 42.7 60 60.2 40 2.20 0.250 600 black 0603cs-43nx_l_ 43 @ 250 mhz 5,2 38 47.0 44 64.9 21 2.00 0.280 600 orange 0603cs-47nx_l_ 47 @ 200 mhz 5,2 38 52.2 62 77.2 35 2.00 0.280 600 brown 0603cs-51nx_l_ 51 @ 200 mhz 5,2 35 55.5 69 82.2 34 1.90 0.270 600 blue 0603cs-56nx_l_ 56 @ 200 mhz 5,2 38 62.5 56 97.0 26 1.90 0.310 600 red 0603cs-68nx_l_ 68 @ 200 mhz 5,2 37 80.5 54 168 21 1.70 0.340 600 orange 0603cs-72nx_l_ 72 @ 150 mhz 5,2 34 82.0 53 135 20 1.70 0.490 400 yellow 0603cs-82nx_l_ 82 @ 150 mhz 5,2 34 96.2 54 177 21 1.70 0.540 400 green 0603cs-r10x_l_ 100 @ 150 mhz 5,2 34 124 49 ? ? 1.40 0.580 400 blue 0603cs-r11x_l_ 110 @ 150 mhz 5,2 32 138 43 ? ? 1.35 0.610 300 violet 0603cs-r12x_l_ 120 @ 150 mhz 5,2 32 166 39 ? ? 1.30 0.650 300 gray 0603cs-r15x_l_ 150 @ 150 mhz 5,2 28 250 25 ? ? 0.990 0.920 280 white 0603cs-r18x_l_ 180 @ 100 mhz 5,2 25 305 22 ? ? 0.990 1.25 240 black 0603cs-r20x_l_ 200 @ 100 mhz 5,2 25 ? ? ? ? 0.900 1.98 200 green 0603cs-r21x_l_ 210 @ 100 mhz 5,2 27 ? ? ? ? 0.895 2.06 200 gray 0603cs-r22x_l_ 220 @ 100 mhz 5,2 25 ? ? ? ? 0.900 2.10 200 brown 0603cs-r25x_l_ 250 @ 100 mhz 5,2 25 ? ? ? ? 0.822 3.55 120 violet 0603cs-r27x_l_ 270 @ 100 mhz 5,2 26 ? ? ? ? 0.830 2.16 170 red 0603cs-r33x_l_ 330 @ 100 mhz 5,2 25 ? ? ? ? 0.900 3.89 100 blue 0603cs-r39x_l_ 390 @ 100 mhz 5,2 25 ? ? ? ? 0.780 4.35 100 yellow 1. when ordering, specify tolerance , termination and packaging codes: 0603cs-r39x jlw tolerance: g =2% j = 5% (table shows stock tolerances in bold.) termination: l = rohs compliant silver-palladium-platinum-glass frit. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: w =7 machine-ready reel. eia-481 punched paper tape (2000 parts per full reel). u = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter w instead. 2. inductance measured using a coilcraft smd-a fixture in an agilent/ hp 4286 impedance analyzer with coilcraft-provided correlation pieces. 3. tolerances in bold are stocked for immediate shipment. 4. q measured at the same frequency as inductance using an agilent/ hp 4291a with an agilent/hp 16193 test fixture. 5. srf measured using an agilent/hp 8720d network analyzer and a coilcraft smd-d test fixture. 6. dcr measured on a cambridge technology micro-ohmmeter and a coilcraft ccf858 test fixture. 7. current that causes a 15c temperature rise from 25c ambient. 8. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering. designer?s kits c324a and b contain 10 each of all 5% values designer?s kits c324a-2 and b-2 contain 10 each of all 2% values
|